phill4paul
06-08-2015, 03:00 AM
Commonly used and unregulated internet discussions and videos about guns and ammo could be closed down under rules proposed by the State Department, amounting to a "gag order on firearm-related speech," the National Rifle Association is warning.
In updating regulations governing international arms sales, State is demanding that anyone who puts technical details about arms and ammo on the web first get the OK from the federal government — or face a fine of up to $1 million and 20 years in jail.
According to the NRA, that would include blogs and web forums discussing technical details of common guns and ammunition, the type of info gun owners and ammo reloaders trade all the time.
"Gunsmiths, manufacturers, reloaders, and do-it-yourselfers could all find themselves muzzled under the rule and unable to distribute or obtain the information they rely on to conduct these activities," said the NRA in a blog posting
Below are the State changes drawing the NRA fire:
Paragraph (b) of the revised definition explicitly sets forth the Department's requirement of authorization to release information into the ''public domain.'' Prior to making available ''technical data'' or software subject to the ITAR, the U.S. government must approve the release through one of the following: (1) The Department; (2) the Department of Defense's Office of Security Review; (3) a relevant U.S. government contracting authority with authority to allow the ''technical data'' or software to be made available to the public, if one exists; or (4) another U.S. government official with authority to allow the ''technical data'' or software to be made available to the public.
The requirements of paragraph (b) are not new. Rather, they are a more explicit statement of the ITAR's requirement that one must seek and receive a license or other authorization from the Department or other cognizant U.S. government authority to release ITAR controlled ''technical data,'' as defined in § 120.10. A release of ''technical data'' may occur by disseminating ''technical data'' at a public conference or trade show, publishing ''technical data'' in a book or journal article, or posting ''technical data'' to the Internet.
This proposed provision will enhance compliance with the ITAR by clarifying that ''technical data'' may not be made available to the public without authorization. Persons who intend to discuss ''technical data'' at a conference or trade show, or to publish it, must ensure that they obtain the appropriate authorization.
I suppose this would include downloads of 3-D printed material. So when does this vote happen in the House so that we may call our representatives and voice our displeasure? Oh, right, it is a regulation.
In updating regulations governing international arms sales, State is demanding that anyone who puts technical details about arms and ammo on the web first get the OK from the federal government — or face a fine of up to $1 million and 20 years in jail.
According to the NRA, that would include blogs and web forums discussing technical details of common guns and ammunition, the type of info gun owners and ammo reloaders trade all the time.
"Gunsmiths, manufacturers, reloaders, and do-it-yourselfers could all find themselves muzzled under the rule and unable to distribute or obtain the information they rely on to conduct these activities," said the NRA in a blog posting
Below are the State changes drawing the NRA fire:
Paragraph (b) of the revised definition explicitly sets forth the Department's requirement of authorization to release information into the ''public domain.'' Prior to making available ''technical data'' or software subject to the ITAR, the U.S. government must approve the release through one of the following: (1) The Department; (2) the Department of Defense's Office of Security Review; (3) a relevant U.S. government contracting authority with authority to allow the ''technical data'' or software to be made available to the public, if one exists; or (4) another U.S. government official with authority to allow the ''technical data'' or software to be made available to the public.
The requirements of paragraph (b) are not new. Rather, they are a more explicit statement of the ITAR's requirement that one must seek and receive a license or other authorization from the Department or other cognizant U.S. government authority to release ITAR controlled ''technical data,'' as defined in § 120.10. A release of ''technical data'' may occur by disseminating ''technical data'' at a public conference or trade show, publishing ''technical data'' in a book or journal article, or posting ''technical data'' to the Internet.
This proposed provision will enhance compliance with the ITAR by clarifying that ''technical data'' may not be made available to the public without authorization. Persons who intend to discuss ''technical data'' at a conference or trade show, or to publish it, must ensure that they obtain the appropriate authorization.
I suppose this would include downloads of 3-D printed material. So when does this vote happen in the House so that we may call our representatives and voice our displeasure? Oh, right, it is a regulation.