lupester
11-30-2007, 04:21 PM
I am going to get some of the Ron Paul postcards printed. I signed up with gotprint.com however they need two picture files....one for the back and one for the front. I don't know how to split the PDF the campaign sent out into two files. Does anyone have the files required?
If you could post them somewhere or send them to lupester at yahoo.com it would be greatly appreciated.
Sorry for such a basic request.
Here is gotprints specs:
The files you send must follow the guidelines listed below.
. Resolution must be at least 300 to 350 dpi, in CMYK color mode.
. Format must be .psd, tiff, eps, pdf or .jpg formats.
. Minimum 1/16" inch bleed on all sides.
Example: A business card 2" x 3.5" would have a bleed size of 2.1" x 3.6" or an 8.5"x11" flyer would have a bleed size of 8.625"x11.125". ( 1/8"}
To download templates, click on the link below. http://gotprint.net/g/showStaticPage.do?page=download_templates.html
. Fonts should be converted to outlines or paths if you are sending eps files.
. Fonts need to embedded in PDF files.
If you could post them somewhere or send them to lupester at yahoo.com it would be greatly appreciated.
Sorry for such a basic request.
Here is gotprints specs:
The files you send must follow the guidelines listed below.
. Resolution must be at least 300 to 350 dpi, in CMYK color mode.
. Format must be .psd, tiff, eps, pdf or .jpg formats.
. Minimum 1/16" inch bleed on all sides.
Example: A business card 2" x 3.5" would have a bleed size of 2.1" x 3.6" or an 8.5"x11" flyer would have a bleed size of 8.625"x11.125". ( 1/8"}
To download templates, click on the link below. http://gotprint.net/g/showStaticPage.do?page=download_templates.html
. Fonts should be converted to outlines or paths if you are sending eps files.
. Fonts need to embedded in PDF files.