Alaska DOT construction signs hacked to read "Impeach Obama"

[sailingaway]

http://www.trbimg.com/img-4ff6294e/turbine/ktuu-dot-construction-signs-hacked-reads-impea-001/187/16x9

http://www.ktuu.com/news/ktuu-dot-construction-signs-hacked-reads-impeach-obama-20120705,0,6147533.story

[kathy88]

Class A misdemeanor. Totally worth it.

[Anti Federalist]

Class A misdemeanor. Totally worth it.

Civil disobedience FTW!

[CaseyJones]

http://articles.ktuu.com/2012-07-05/signs_32555718

[tangent4ronpaul]

http://www.neatorama.com/2009/01/24/how-to-hack-construction-signs/

Ever wonder how to make the construction light signs change their text? Now you can with these handy instructions:

“It will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in”

http://uploads.neatorama.com/wp-content/uploads/2009/01/zombiesahead.jpg

http://artoftheprank.com/2009/01/24/how-to-program-an-electronic-road-sign/

http://artoftheprank.com/blog/wp-content/uploads/2009/01/portablesigns.jpg

1. The access panel on the sign is generally protected by a small lock, but often are left unprotected. Upon opening the access panel you can see the display electronics.

2. The black control pad is attached by a curly cord, with a keyboard on the face.

3. Programming is as simple as scrolling down the menu selection to “Instant Text”. Type whatever you want to display, Hit Enter to submit. You can now either throw it up on the sign by selecting “Run w/out save” or you can add more pages to it by selecting “Add page”

** HACKER TIPS ** Should it will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in!

:D

-t

[tangent4ronpaul]

How to hack um instructions in the other thread.

join threads?

-t

[Bruno]

Noted for future reference. ;)

[ghengis86]

Merge threads. Good stuff

[Carson]

Class A misdemeanor. Totally worth it.

Probably so much drone traffic above now it is starting to rain them.

[Carson]

How to hack um instructions in the other thread.

join threads?

-t

We could do this without big government.


http://www.neatorama.com/2009/01/24/how-to-hack-construction-signs/

Ever wonder how to make the construction light signs change their text? Now you can with these handy instructions:

“It will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in”

http://uploads.neatorama.com/wp-content/uploads/2009/01/zombiesahead.jpg

http://artoftheprank.com/2009/01/24/how-to-program-an-electronic-road-sign/

http://artoftheprank.com/blog/wp-content/uploads/2009/01/portablesigns.jpg

1. The access panel on the sign is generally protected by a small lock, but often are left unprotected. Upon opening the access panel you can see the display electronics.

2. The black control pad is attached by a curly cord, with a keyboard on the face.

3. Programming is as simple as scrolling down the menu selection to “Instant Text”. Type whatever you want to display, Hit Enter to submit. You can now either throw it up on the sign by selecting “Run w/out save” or you can add more pages to it by selecting “Add page”

** HACKER TIPS ** Should it will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in!

:D

-t

[tangent4ronpaul]

Wanted: more people to read this thread and take notes to add to your skill set and add to your activist toolbox.

-t

[QuickZ06]

http://www.neatorama.com/2009/01/24/how-to-hack-construction-signs/

Ever wonder how to make the construction light signs change their text? Now you can with these handy instructions:

“It will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in”

http://uploads.neatorama.com/wp-content/uploads/2009/01/zombiesahead.jpg

http://artoftheprank.com/2009/01/24/how-to-program-an-electronic-road-sign/

http://artoftheprank.com/blog/wp-content/uploads/2009/01/portablesigns.jpg

1. The access panel on the sign is generally protected by a small lock, but often are left unprotected. Upon opening the access panel you can see the display electronics.

2. The black control pad is attached by a curly cord, with a keyboard on the face.

3. Programming is as simple as scrolling down the menu selection to “Instant Text”. Type whatever you want to display, Hit Enter to submit. You can now either throw it up on the sign by selecting “Run w/out save” or you can add more pages to it by selecting “Add page”

** HACKER TIPS ** Should it will ask you for a password. Try “DOTS”, the default password.

In all likelihood, the crew will not have changed it. However if they did, never fear. Hold “Control” and “Shift” and while holding, enter “DIPY”. This will reset the sign and reset the password to “DOTS” in the process. You’re in!

:D

-t

If I go to jail, I'm blaming you and rap music.

[tangent4ronpaul]

Class A misdemeanor. Totally worth it.

Totally agree!

-t

[Luciconsort]

this is great!

[tangent4ronpaul]

If I go to jail, I'm blaming you and rap music.

LOL! - ok!

-t